DURAFLEX GLOSS HI-TACK

FACESTOCK

​

• A white cavitated, two-sided coated, bi-axially orientated polypropylene film with a print receptive top coating.

• Base weight: ISO 536 45.4g/m²

• Caliper: ISO 534 0.060mm

​

ADHESIVE

​

• A general-purpose permanent synthetic rubber-based adhesive.

• Loop Tack: 24-28 N/25mm Finat FTM1 Glass

• 180 Degree Peel: 24-26 N/25mm Finat FTM1 Steel

​

LINER

​

• One side siliconized Honey Glassine liner.

• Basis weight: ISO 536 60g/m²

• Caliper: ISO 534 0.055mm

​

PERFORMANCE DATA

​

• Minimum application temperature: 5°C

• Service temperature: -20°C to 60°C

• This adhesive meets composition requirements of indirect food additives regulations FDA 21-CFR-175.105 “Adhesive”, and may stand in direct contact with dry and moist, non–fatty foodstuffs.

​

APPLICATION AND USE

​

• Good adhesion to a wide variety of substrates.

• Excellent tack with a good balance between adhesion and cohesion.

• Excellent aging stability. The construction should undergo thorough compatibility, production line, and field tests before order commitment to ensure end-use suitability.

• Not generally suitable for use on plasticised PVC. Take care of non-uniform and flexible surfaces.

​

CONVERSION PRINTING

​

• Suitable for multi-color printing.

• Good print quality by all the conventional print methods, good convertibility with rotary and flat-bed dies.

• The above does not represent any guarantee or warranty and the buyer must independently determine the suitability of the construction/adhesive/face stock for the purpose of the purchase.

​

 SHELF LIFE

​

• One year shelf life from date of manufacture at 22°C in dry conditions.

​

STATEMENT OF PRACTICAL USE

​

• The information provided above is typical values given in good faith. We cannot take responsibility for any damage caused by our products as they are used outside of our control. The data used in this specification sheet represents average, they are used for reference only and could be modified without notice.

​