FACESTOCK

​

• 2 mil polyimide film withstands intermittent heat up to 398° and endures wave solder and standard acidic solvent.

• Tested and approved for leaded and non-leaded reflow – top and bottom; wave solder – top preferred.

• Super smooth topcoat allows for printability up to 600 DPI for high –density barcodes such as data matrix codes with consistent ANSI scannability.

• Topcoat has static dissipating properties that minimise the risk of print voids.

• Thermal Transfer Printable.

​

ADHESIVE

​

• Permanent pressure sensitive adhesive bonds well to standard PCB’s

• Low out-gassing of adhesive.

​

LINER

​

• Available on a variety of liners to meet your specific application and dispensing requirements.

​

PERFORMANCE

​

• The printed surface should not be touched while hot. The resin TTR will be soft and smudge.

• We recommend exposing printed labels to high heat prior to performing tests.

• All surfaces should be clean, dry and free of any surface contamination. IPA is the recommended cleaning solution.

​

CONVERSION PRINTING

​

• Service temp range from 260°C intermittent to 398°C for every 5 min.

• Minimum application temperature 18°C.

​

SHELF LIFE

​

• Two years when stored at 21°C with 50% relative humidity.

​

STATEMENT OF PRACTICAL USE

​

• Test data is based on laboratory test structure. Actual application testing should be done to confirm suitability for application.